😎 Summer Sale Exclusive - Up to 50% off AI-powered stock picks by InvestingProCLAIM SALE

Earnings call: Teradyne reported a revenue of $730 million

Published 2024-07-25, 08:38 p/m
© Reuters.
TER
-

Teradyne, Inc. (NASDAQ:TER), a leading supplier of automation equipment for test and industrial applications, reported a revenue of $730 million and non-GAAP earnings per share (EPS) of $0.86 for the second quarter of 2024. The company highlighted strong growth in the semiconductor and Advanced Robotics industries, attributing it to robust demand in cloud AI and AI applications.

With a focus on the mobile and industrial markets, Teradyne anticipates AI to be a key driver of future growth. The Robotics business also showed impressive performance, with a 26% year-over-year increase in revenue, reaching $90 million. Teradyne projects low single-digit revenue growth for the full year and plans to invest in engineering and sales to reinforce its market position and foster sustainable growth.

Key Takeaways

  • Teradyne reported Q2 2024 revenue of $730 million and non-GAAP EPS of $0.86.
  • Growth was primarily driven by demand in cloud AI and AI applications.
  • AI is expected to significantly contribute to future growth, especially in mobile and industrial markets.
  • The Robotics business revenue grew by 26% YoY to $90 million.
  • The company expects low single-digit revenue growth for the full year.
  • Teradyne repurchased $8 million of shares and paid $19 million in dividends.
  • Q3 sales forecasted between $680 million to $740 million with non-GAAP EPS of $0.66 to $0.86.
  • Full-year gross margins expected to be 58% to 59%; Robotics business to break even in 2024 and be profitable in 2025.
  • Teradyne holds a 10% equity stake in Technoprobe following a net cash outlay of $434 million.

Company Outlook

  • Teradyne anticipates a strong recovery in the mobile market in 2025, increasing mobile system-on-chip (SoC) revenue.
  • Growth potential in compute and robotics businesses is optimistic, with expansion strategies and new product offerings.
  • The company expects to see an increase in utilization rates in the second half of the year.

Bearish Highlights

  • Mobile SoC revenue in 2024 is expected to be comparable to compute revenue due to current market weakness.
  • Underutilization of capacity and mobility are currently impacting revenue growth.

Bullish Highlights

  • The compute Total Addressable Market (TAM) is estimated to grow from $1.4 billion in 2023 to $1.6 billion in 2024.
  • A projected 20% to 25% compound annual growth rate (CAGR) for the next few years.
  • Service and software opportunities in Robotics are expected to be a significant portion of revenue by 2026.

Misses

  • No significant uptake in the global deployment of the service business yet; the global rollout is expected in the back half of 2025.

Q&A Highlights

  • Teradyne's win rate for sockets in VIPs is currently even, with a 60/40 split in favor of Teradyne for testers loaded.
  • The investment in Technoprobe is expected to have a low-single-digit, long-term effect on market share in the Semi Test space.

Teradyne's Q2 2024 earnings call revealed a company leveraging strong industry demand to drive growth and planning strategic investments to secure its future in AI and robotics. With its eye on the evolving market landscape and a commitment to innovation, Teradyne is positioning itself to capitalize on emerging opportunities while navigating the challenges of the current market.

InvestingPro Insights

Teradyne, Inc. (TER) has shown a significant presence in the automation equipment industry, backed by its recent financial performance and strategic market positioning. Here are some key data and insights from InvestingPro that can provide a deeper understanding of the company's financial health and market valuation:

  • The company's market capitalization stands at $19.44 billion, reflecting its substantial size and influence within the sector.
  • Teradyne is currently trading at a high earnings multiple, with a P/E ratio of 39.07, suggesting that investors may expect high future earnings growth from the company.
  • Despite recent market fluctuations, Teradyne has maintained a consistent record of dividend payments, with dividends growing by 9.09% over the last twelve months as of Q1 2023.

InvestingPro Tips indicate that while the stock has faced challenges in the short term, with significant price declines over the last week and month, its fundamental strength is underscored by its ability to cover interest payments with cash flows and the maintenance of dividend payments for 11 consecutive years. Additionally, the company's liquid assets exceed its short-term obligations, and it operates with a moderate level of debt.

For investors looking to delve deeper into Teradyne's prospects, InvestingPro offers a range of additional tips. Currently, there are 15 more InvestingPro Tips available, which could help investors make more informed decisions. To explore these further, consider using the promo code PRONEWS24 to get up to 10% off a yearly Pro and a yearly or biyearly Pro+ subscription at https://www.investing.com/pro/TER.

By integrating these insights with the robust growth in the semiconductor and Advanced Robotics industries, as well as the company's focus on AI applications, investors can gain a comprehensive view of Teradyne's potential for sustained growth and market leadership.

Full transcript - Teradyne Inc (TER) Q2 2024:

Operator: Good day ladies and gentlemen and welcome to Q2 2024 Teradyne, Inc. Earnings Conference Call. At this time all participants are in listen-only mode. A question-and-answer session will follow the formal presentation. [Operator Instructions] Please note that this conference is being recorded. I would like to turn the conference over to Traci Tsuchiguchi. Please go ahead ma'am.

Traci Tsuchiguchi: Thank you. Good morning, everyone and welcome to our discussion of Teradyne's most recent financial results. I'm joined this morning by our CEO, Greg Smith; and our CFO, Sanjay Mehta. Following our opening remarks, we'll provide details of our performance for the second quarter of 2024 and our outlook for the third quarter of 2024. The press release containing our second quarter results was issued last evening. We are providing slides as well as the copy of this earnings script on the Investor page of the Teradyne website that may be helpful in following the discussion. Replays of this call will be available via the same page after the call ends. The matters we discuss today will include forward-looking statements that involve risk factors that could cause Teradyne's results to differ materially from management's current expectations. We caution listeners not to place undue reliance on any forward-looking statements included in this presentation. We encourage you to review the Safe Harbor statement contained in slides accompanying this presentation as well as the risk factors described in our annual report on form 10-K filed with the SEC. Additionally, these forward-looking statements are made only as of today. During today's call, we will refer to non-GAAP financial measures. We have posted additional information concerning these non-GAAP financial measures including reconciliation to the most directly comparable GAAP financial measures where available on the Investor page of our website. Looking ahead between now and our next earnings call, Teradyne expects to participate in technology and investor-focused investor conferences, hosted by KeyBanc, Evercore, Jefferies, Citigroup and Goldman Sachs (NYSE:GS). Following Greg and Sanjay's comments this morning, we'll open up the call for questions. This call is scheduled for one hour. Greg?

Greg Smith: Thank you, Traci. Good morning, everyone, and thanks for joining us. Today, I will summarize our second quarter results and discuss the trends we are seeing in the semiconductor and Advanced Robotics industries. Then Sanjay will go into more depth about our second quarter results and forward looking guidance. At a high level the market dynamics that we identified in our April earnings call have continued through the second quarter. Cloud AI is driving strong demand across the SoC and memory test markets. We have accelerated engineering and sales investments to continue to improve our market position, drive share and increase our ability to deliver long-term sustainable growth. Outside of compute and memory, all other major test markets, including mobile, continue to be soft. Robotics has delivered on-plan results in a weak macro environment and we continue to expect incremental growth each quarter of this year. Focusing in on Q2, we delivered second quarter financial results above our revenue, gross margin and earnings guidance ranges. Memory and SoC delivered above our plan and showed strong performance in the quarter, primarily driven by AI applications. Continuing the trend we noted in the first quarter, Cloud AI demand drove compute revenue with considerable strength in networking devices. AI enabled data centers have a very high number of network connection points to support training large language models, which is changing the mix in this segment to include more networking silicon. Our historic strength in networking combined with shipments to support a vertically integrated producer or VIP resulted in compute revenue in the first half of 2024, exceeding all of our compute revenue in 2023. We currently expect that Teradyne's SoC revenue from the compute end market will be on par with mobile revenue this year. In memory AI driven HBM DRAM demand remains strong. We are now seeing AI driven servers pulling demand across a broader range of memory, including enterprise SSD NAND flash. We are also seeing memory demand for the mobile market with strength in LPDDR and continuing retooling to support the latest protocol based mobile flash memory technologies. As a result, our memory business has grown nearly 30% in the first half of 2024 compared to the first half of 2023. While we are not changing our estimated memory tam expectation for the year, we expect that the market is trending towards the upper end of our $1.2 billion to $1.3 billion forecast. Moving on to Q3, the positive impact of AI on test is expected to continue into the third quarter. However, a meaningful uptick in other end markets, including legacy auto and industrial, may not occur until the 2025 timeframe. As a result, at the company level for the full year, we continue to expect low single digit revenue growth from 2023. As a reminder, excluding the impact of the sale of DIS to Technoprobe, our 2024 revenue growth would have been a couple of percentage points higher. Now, turning to Robotics, despite a weak macro environment, our Advanced Robotics business grew sequentially from Q1 to Q2. Looking at the first half of 2024, we grew 11% compared to the first half of 2023. We estimate that traditional players in the automation space have seen sales actually decline in the range of 5% to 7% over the same period. We are executing a three-pronged growth strategy for our Advanced Robotics business; SAM expansion, channel transformation and recurring services and software. In the second quarter, we have made progress in all three areas.

MiR1200 Pallet Jack: Our highest priority in our Robotics go-to-market transformation is the development of an OEM solutions channel for UR. We have seen that customers purchasing cobot-based solutions from these partners get into production more quickly and have fewer problems than customers that build their own solutions or rely upon an integration partner. There are two aspects to the OEM Channel strategy. The first is signing up new OEM solution partners. In the first half of 2024, we have increased the total number of OEM solutions partners by 8%. Second, we work with these partners to get them to scale, which we define as having an annual revenue run rate above $1 million. Midway through the year we have nearly as many OEM solution partners that have reached that revenue level as we had in all of 2023. One of our largest revenue OEM partners in the first half of 2024 uses our cobots in an AI based logistics solution. Overall, the OEM solutions channel has shown over 70% growth from the first half of 2023 to the first half of 2024. In the second quarter, the OEM channel represented over 30% of UR's revenue. Finally, because of the criticality of the processes that our Robotics are being used to automate, we saw an opportunity to build a strong service business. In the first half of 2024 we launched managed service offerings at UR and MiR and are beginning to see customer uptake. On balance, the positive effect of these growth vectors and the challenging demand environment, we are expecting growth towards the low end of this year's target 10% to 20% range. Last quarter, I shared the idea that AI would be a transformational, secular growth driver across Teradyne's businesses. In the first half of 2024, we saw the considerable AI driven growth in memory, networking and ramps of vertically integrated producers. But we think that this is just the beginning. We believe that a larger opportunity lies ahead as inference applications and edge AI begins to permeate the mobile and industrial end markets, markets where Teradyne is traditionally strong. We are also already seeing the impact of AI on our Robotics business, with AI powered OEM solutions for UR and a strong backlog for our AI enabled pallet jack. We believe that we are well positioned as a leading platform for the development of AI based solutions for manufacturing and logistics. We are seeing AI driven growth now and we expect AI to be an overarching growth driver for years to come in test and in Robotics. With that, I'll turn the call over to Sanjay. Sanjay?

Sanjay Mehta: Thank you, Greg. Good morning everyone. Today I'll cover the financial summary of Q2, provide our Q3 outlook and planning assumptions for the full year. Now to Q2. Second quarter sales were $730 million, which was $5 million above the high end of our guidance with non-GAAP EPS of $0.86, which was above our high end guide of $0.84. Non-GAAP gross margins were 58.3%. This was above our guidance due to higher volumes and product mix. Non-GAAP operating profit was approximately 22%. Turning to our revenue breakdown in Q2, Semi test revenue for the quarter was $543 million, with SoC contributing $414 million and memory $129 million. Strength in SOC was driven by both compute and mobile. Memory test shipments were driven by technology tooling for new UFS 4.0 standard in mobility. While the broader auto industry remained sluggish, we benefited from a VIP with a large purchase in this segment, reflecting edge AI's impact on the auto market. In memory, we continue to expect DRAM to dominate the memory mix. We have significant backlog for HVM, enabling strength in the memory market driven by AI. We closed the sale of our device interface solutions business or DIS to Technoprobe on May 27. DIS contributed $16 million to our revenue in the quarter consistent with our expectations in System test group Q2 revenue was $61 million with $17 million in storage tests on low SLT and HDD demand. Recall SLT has high exposure to the smartphone market and even as HDD end markets begin to recover, tester utilization remains low. In Wireless Test revenue was $36 million in Q2, improving as expected due to gaming and the initial ramp of Wi-Fi 7. Now to Robotics. For the fourth quarter in a row we executed to our revenue plan in Robotics. Revenue was $90 million, up sequentially and increased 26% year-over-year. In the quarter, UR contributed $75 million and MiR contributed $16 million. Given the potential changes in the regulatory environment involving China, we thought it would be helpful to provide some insight into our revenue exposure in that region. Year-to-date, approximately 10% of our total company sales were shipped to China. This includes shipments to indigenous and multinational customers. Total sales to indigenous customers was less than 5% in the first half of 2024. This is consistent with the full year of 2023. Our team continues to service our customers in this market while complying with all regulations. Shifting to some cash metrics. At a company level, our free cash flow was $171 million in the quarter. Strong free cash flow in the quarter was primarily driven by earnings and net working capital improvements. We repurchased $8 million of shares in the quarter and paid $19 million in dividends. We ended the quarter with $584 million in cash and marketable securities. The completion of the Technoprobe transactions resulted in a net cash outlay of $434 million and resulted in a 10% equity stake in Technoprobe. Some other financial information in Q2. We had two 10% customers in the quarter. The tax rate, excluding discrete items for the quarter, was 14.25% on a GAAP basis and 15% on a non-GAAP basis. Now to our outlook for Q3. Q3 sales are expected to be between $680 million and $740 million, with non-GAAP EPS in the range of $0.66 to $0.86 on 164 million diluted shares. GAAP EPS is expected to be in the range of $0.62 to $0.82. Some color on our Q3 revenue expectation. In our April call, our mid-guide for Q2 was $695 million, and we noted that the third quarter would be flattish. Our second quarter revenue came in higher than we forecasted on the heels of strong demand in our Semi Test business. Our third quarter revenue forecast of $710 million at the midpoint is now higher than it was 90 days ago. Third quarter gross margins are estimated at 58.5% to 59.5% and OpEx is expected to run at 38% to 40% of third quarter sales, up from Q2. As Greg discussed, we are acting on opportunities to accelerate investments that we believe will drive share and long-term sustainable growth. The non-GAAP operating profit rate at the midpoint of our third quarter guidance is 20%. Our total semiconductor ATE TAM estimates remain unchanged from our view in April. However, we made some slight adjustments within the segments. We have included a slide in the appendix of our earnings deck with this information. Recall our SoC TAM range is $3.6 billion to $4.2 billion with a midpoint of $3.9 billion. This is comprised of compute, which we now estimate to be $1.6 billion, up $100 million from our prior estimate. The increase in compute is offset by a reduction in our estimate for mobile, which is down $100 million to $800 million. We estimate auto MCU at $500 million, industrial at $300 million, and services at $700 million each at the midpoint of our range. Our estimated memory TAM range of $1.2 billion to $1.3 billion appears to be tracking towards the high end. Back to revenues. With our outperformance in the first half of the year, our expectation for revenue distribution for the full year is now less back half weighted than our view in April. We currently expect around 48% of the company's revenue to be in the first half and 52% in the second half. We expect full year revenue to grow in the low single digit range compared to 2023. Note that excluding the impact of the DIS divestiture, our full year revenue growth expectation would be nearly 3 points higher. Now to gross margins. Gross margins have improved through the course of the year and are expected to be at our full target gross margin model by the fourth quarter. Full year gross margins will likely be in the 58% to 59% range, unchanged from our prior outlook. Regarding OpEx for the full year, we expect full year 2024 OpEx to grow approximately 8%, which is above our prior guidance of 5% to 7% as we accelerate investment and opportunities to continue to strengthen our position and gain share. Turning to Robotics profitability. As Greg noted, we expect to grow revenue towards the low end of our 10% to 20% range. We expect Robotics will be roughly breakeven in 2024. Our GAAP and non-GAAP tax rate, excluding discrete items, are forecasted to be 14.25% and 15% respectively in 2024. With regard to capital allocation, we will continue to target our share buybacks in 2024 to an amount necessary to offset dilution from equity compensation and our employee share purchase program in order to build cash back up to $800 million. Summing up, we delivered sales and earnings above the high end of our guidance range as memory and compute revenue exceeded our plan in Semi Test. The mobile, industrial and legacy auto markets remained soft. Our Robotics team delivered sequential and year-over-year growth as we continue to execute our new product development and go-to-market strategies. Our company's first half performance gives us confidence that we are on track for the year. Our midterm fundamentals remain strong and we are investing to capture the opportunities beyond 2024. With that, I'll turn the call back to the operator to open the line up for questions. Operator?

Operator: Thank you, sir. [Operator Instructions] Our first question comes from C.J. Muse of Cantor Fitzgerald. Please go ahead.

C.J. Muse: Yes, good morning. Thank you for taking the question. I was hoping maybe you could speak to visibility and outlook into 2025, particularly around Semi Test, and would love to hear your thoughts around how you're seeing recovery in mobility, as well as on the memory side progress with securing that second potential customer in HBM.

Greg Smith: Hey CJ, this is Greg. Basically, we are pretty bullish on 2025. The Semi Test market in 2024, we're seeing strength in computing and we're also seeing fair amount of upgrade business where people are converting testers that were underutilized in mobile to use for compute and VIP applications, so that's soaking up some of the excess in that market. We expect that to really sort of accelerate business. As mobile returns in 2025, it won't have that capacity to grow into. On HBM, I think we continue to expect that we are going to make progress in two directions on HBM. One is that our share has primarily been in the pre-stack wafer test of HBM, and we believe that we're going to be gaining share in performance tests of the HBM memory after it's been stacked. And so we're hoping that we can expand both our market share within the account where we are participating in HBM and then also break into additional accounts for HBM and that would be more of a 2025 thing. So I think overall, our outlook for 2025 and into 2026 is in line with what we talked about in January.

C.J. Muse: Excellent. And I guess as a followup, could you update us where you are with VIP? I think you talked about one large auto customer in June. Can you kind of size that for the industry for this year, how you see that growing next year and what additional kind of customers or end markets, whatever color you can give us in terms of how to think about the trajectory of that business into 2025?

Greg Smith: Sure. So we, I think the way that we're looking at VIP is right now, because that growth has been happening at a time when there is a fair amount of capacity in OSATs to soak up. We're actually trying to keep track of the number of testers that are being used for these VIP customers. And right now it's hundreds of testers. There are currently hundreds of testers that are being used for VIP and we expect that to end. We have, I guess we should probably call it multiple VIP customers that are loading significant numbers of testers. We have additional VIPs where they've made plan of record decisions to put their parts on our testers and those parts are going to be released later in this year and into 2025. So we think that we'll probably exit this year with twice as many testers being used for these vertically integrated producers than we have right now.

C.J. Muse: Thank you.

Operator: Our next question comes from Tim Arcuri of UBS. Please go ahead.

Timothy Arcuri: Thanks a lot. Sanjay, can you help us handicap the guidance for the DIS sale? I know you said it contributed $16 million in June. I mean, if I run rate that out, it's probably a $20 million to $25 million number that we should effectively sort of adjust to September guidance for. Is that correct on like a run rate basis?

Sanjay Mehta: Yes. If I go back to 2023, it was about $100 million business. And $20 million to $25 million is roughly the number. And this quarter, with the sale occurring kind of end of the second month on May 27, it was $16 million. So I think that estimate you have is reasonable. And as I noted my prepared remarks, we expect growth year-over-year to be in the low single digits, but without DIS, you'd expect it, or that's a shortfall of roughly 3 points. So you would increase that by 3 points if there was no DIS in 2023 and 2024 from a growth perspective.

Timothy Arcuri: Okay, got it. And then, Greg, talking about next year, I mean, you guys have always talked about N2 being a big driver for the SoC TAM and I mean, we're seeing clear evidence that there's going to be a lot more N2. We're seeing upside pretty much everywhere for N2 wafer demand next year and the speed of the ramp. So I would think you're pretty optimistic about, I mean, sure, there's the mobility piece, but I would think you're pretty optimistic about next year because of N2. Can you speak specifically to the, you've kind of always talked about that as a big driver, and here it is. So can you talk about that?

Greg Smith: Sure, yes. So we tend to think of the process nodes not as, from our Business perspective, not as a driver, but as an enabler. So the 2 nanometer or Gate-All-Around, they're going to be enablers for higher device complexity. But the thing that really drives our Business is whether the end market is pulling for that complexity. And we're really optimistic that between cloud AI and especially for edge AI like in mobile, that that is going to be a major driver for companies to get into N2 even at a faster rate than they got into N3. So we think that it's a good thing that the capacity is being put in place for N2 because we think that it's going to be needed. In addition, the deployment of edge AI, it's really going to increase complexity of the application processors. It's also going to be pulling harder on the mobile part of the memory market. So we think that there's sort of a virtuous circle in terms of the capacity being put in place, the end market demand that's going to use that capacity, and then the pull effect on other parts of the market enabled by the features that are going into these products. So we think basically this is going to be a good demand driver really through the rest of this midterm, 2025, 2026, 2027.

Timothy Arcuri: Got it. Okay, thank you.

Operator: The next question comes from Mehdi Hosseini of SIG. Please go ahead.

Mehdi Hosseini: Yes, thanks for taking my question. I want to followup on your commentary that mobile SoC revenue in 2024 will be comparable to compute. I understand the diversification of customers and additional data center. But your assumption also is impacted by a weak mobile market. So, assuming that N2 and smartphone refresh in 2025 would help you with the mobile SoC. Should we also assume that the compute would also grow at the same rate? In other words, this equilibrium, would it sustain into next year?

Greg Smith: So that's a good question, Mehdi, because there's a little bit of subtlety to this. So you're right that one of the reasons that our mobile revenue and our compute revenue are going to be comparable in 2024 is because the mobile market is weak. But the other reason is, and I talked about this in my prepared remarks, that our compute revenue for the first half is bigger than all of our compute revenue for 2023 and we see good strength for compute in the second half of this year as well. So, like, things are going great in compute. Next year, we think that compute is going to remain strong, but the TAM sizes for compute are likely to be in the same range, maybe a little bit stronger than where they were. The mobile market really should come back pretty strongly, and so our mobile revenue will come back with that. So we anticipate that we'll have good revenue growth in compute, but it's very possible that mobile will outweigh it next year because of the strength of that recovery.

Mehdi Hosseini: Okay, thank you and then one followup for Sanjay. If Robotics business is going to be breakeven in 2024, then profitable next year, is the underlying assumption baked into your 2026 target or could there be an acceleration of profitability? I just want to see how the breakeven in 2024 for Robotics fit into your 2026 target. Thank you.

Sanjay Mehta: Sure. So, in 2024, we started the year with thinking that we'd be just a little bit above breakeven, low single digits. As we look to the year, and we see the range of 10% to 20% this year of growth, and we see that coming in more to the lower end of the range, we think that number is about breakeven. And in our earnings model, we had 20% to 30% growth. So with that incremental scale, we did build in a level of profitability in the outer years, and we still believe that that trajectory is going to occur as we move into the future.

Mehdi Hosseini: Okay, great. Thank you.

Operator: The next question comes from Vivek Arya of Bank of America (NYSE:BAC). Please go ahead.

Vivek Arya: Thanks for taking my question. Greg, for next year, as you suggested, the turnaround in mobile seems to be kind of the biggest catalyst for Teradyne. So when we look at the TAM of about $800 million for this year, could you help us give some range for what recovery looks like? Are we talking 10%, 20%, 30%, 40%? Just can you help us have some broad range? And how much of this you think comes from mobile industry with faster unit growth? How much of this comes from more testing complexity? And then a kind of a small nuance question there is, your large customer could also have a change in their modem suppliers for at least some SKUs. Is that net positive, negative, neutral to your business?

Greg Smith: So let me take the second part of your question first, and then, actually, I'm going to tag team the first part with Sanjay because I want to work on sort of a history lesson perspective of the mobile TAM to try and bracket what we would see in 2025. But in terms of the modem supplier, for the our historically largest customer, a thing to remember is that whoever is supplying that modem is also likely supplying all of the ancillary devices associated with that modem. So there's a modem, there's power management, there's RF, and if that was to change, there's a lot of pluses and minuses. The thing that I will tell you is that they're all relatively small relative to the magnitude of the overall AP business. So if that was to change, I would expect it to be a slight positive for us, but I don't think it's a game changer kind of a thing. And so, on the mobile TAM, so Sanjay, could you just give us sort of the history of the mobile TAM, like over the past few years?

Sanjay Mehta: Sure. So, this year at the midpoint, as we've noted, $800 million, and last year we noted approximately $900 million, and in 2022, it was roughly $1.6 billion. It peaked our view in 2021 at approximately $2 billion.

Greg Smith: Okay, so take what I'm going to say with a grain of salt, because we are entering into our strategic planning process and haven't completed sort of an updated view of 2025. But the thing that I will tell you is that the mobile TAMs are unlikely to go as high as we saw during the COVID peak, but they're likely to be significantly stronger than what we're seeing in 2023 and 2024. So going in the middle of that range might not be a bad idea, but it's a pretty big range. Vivek, does that help at all?

Vivek Arya: Yes, extremely helpful. Thank you so much. And for my followup question on the Robotics business, you've taken the growth rate this year towards the lower end of the 10% to 20%. I think you mentioned some macro factors. If I look at, again a historical view, that segment continues to disappoint every year in terms of its growth rate. It's not really profitable. So I'm curious, at what point do you think it actually realizes the promise and anticipation? Is it a matter of scale? Is it a matter of channel? What will it take for it to actually achieve the growth rate that you anticipate for that business?

Greg Smith: That's a great question. So I think you are -- in terms of your hypothesis, you're hitting the nail on the head, that part of it is scale, part of it is channel. The thing that we are really -- we're actually really optimistic about our Robotics business right now, that the macro environment is really weak. Our automation peers are struggling with declining sales. We posted an 11% gain over the first half. And the thing that is encouraging to us is that that 11% gain is on the back of specific aspects of the strategy that we're executing. We were trying to expand our SAM [ph] by adding a high payload, high payload options for universal robots. And those robots are accounting for 20% of our sales in the quarter. We are trying to build additional channels, and our OEM channel grew by 70% year-on-year for the first half. We have additional irons in the fire to drive additional growth that have not yet paid off. And there are primarily other aspects of market expansion. So our Pallet Jack for the AMR business, additional products that are coming to market for UR as well. We have additional channels that we are building. We've been working for the last year and a half on building out a large accounts channel and we have significant pipeline for that, but we don't have significant revenue growth to see from it yet. And then finally, we think that there's a very significant revenue opportunity in service and recurring software. Right now, that's a vanishingly small part of our revenue in Robotics. But every business that has machinery in critical processes definitely needs to have a way to keep that stuff running. And we have an example in our semiconductor business, where service represents a significant portion of our overall revenue and we are trying to apply that same model of managed service plans in Robotics. And we're actually seeing good customer uptake, but not a lot of revenue yet. So we think that those three engines are going to be kicking in, in 2025, on top of growth that we're going to still get from the things that we've done in 2023 and 2024. So we're pretty optimistic that the end market is terrible, but we're actually doing what we said we were going to do in terms of the strategy.

Vivek Arya: Okay.

Operator: Our next question comes from Krish Sankar - TD (TSX:TD) Cowen. Please go ahead.

Krish Sankar: Yes, hi. Thanks for taking my question. I have two of them. Greg, just first on clarification, you maintain your full year revenue guide of low single digits, but I remember compared to last quarter, you kind of increased the test revenue up modestly. So I'm just kind of curious, is this just a little bit of nuance that is within the margin of error or anything else happening over there?

Sanjay Mehta: Hi Chris, it's Sanjay. At a top level, you're right, we did guide the full year consistently with the first half a little bit stronger than we anticipated. And what's happening under the covers is Semi Test is up, but our other test businesses are down a little bit in the way of in storage it's tied to the global market and SLT and the HDD. As that market returns, there is still underutilized capacity. In our Defense and Aerospace business, we had some projects push out and our production board business we had, it's tied to the automotive slowdown. And so overall Semi Test is stronger and the other test is lower. And then we did move to the lower end of our Robotics range. So at a top level we're calling the same year, but Semi Test stronger, other tests a little weaker, and Robotics is at the low end of the range.

Krish Sankar: Got it. Very helpful, Sanjay. And then just a quick followup. You kind of mentioned strength in networking test. If you look at some of the GPU providers, clearly where [indiscernible] has a very strong position. Do you think this networking test opportunity can manifest itself into some share gains on the GPU side or you think that AI opportunity is more to the VIPs, not to the Semi device makers?

Greg Smith: I'm really, really glad you asked that question. So there are a couple of things going on in the compute space around this topic of cloud AI and building large capabilities to do training of large language models. So the first is obviously huge demand for GPU's. That's why people have seen Nvidia (NASDAQ:NVDA) run up as much. They are providing an incredibly valuable engine for all of this. But if you look at an AI enabled server, there is a much larger number of high speed data links within a server rack than there is for a traditional server. And so in more traditional accelerated computing, we were seeing a ratio of, within a specific account, it might be 90% GPUs, 10% networking, that's trending more towards 20% or even higher. So there's definitely a tailwind there that is beneficial. The other is, as these models become more sophisticated and the players in this space are trying to differentiate between these large language models, they're each trying to gain an advantage through architecture and that's driving this VIP design trend that we're seeing. So we think that there's enough end market demand to drive growth for both sort of traditional GPU based AI models and also drive even faster growth for the VIP or homegrown silicon that is being built into these large server firms.

Krish Sankar: Got it. Thank you, Greg, very helpful.

Operator: Our next question comes from Toshiya Hari of Goldman Sachs. Please go ahead.

Toshiya Hari: Hi, good morning. Thank you so much. Greg, you talked about strength in compute soaking up some of the idle capacity across the mobile space. I'm curious where test utilization rates are in mobile, across OSATs and your IDM customers, to the extent you've got some visibility. And then for auto and industrial as well, where are utilization rates generally today? And when you talk about a recovery in 2025, I know it's hard to predict, but at what point do you think utilization rates get to a point where customers resume purchases of testers?

Greg Smith: So, to answer the last part of your question first, I think we're very close to the point where the balance is going to tip back away from soaking up capacity to driving new system sales. The trends that we're seeing, third party data around test utilization are showing a good uptick, a little bit above sort of typical seasonality. Our own data is showing mixed utilization right now. We don't see a clear trend there, but we do have a fair amount of both systems that have already been converted and also upgrades that would be used as conversion kits. And so that is going to essentially occupy hundreds of testers that are underutilized now. So we are expecting utilization to tick up pretty strongly in the second half of this year, and for that to tip over to the point where it turns into real system demand. When you get to the IDM customers, especially in auto and industrial, there's an interesting, many of those customers are down significantly year-over-year from 2023 to 2024, but a lot of them are persisting in relatively aggressive capacity expansion plants. They see the same thing that we've been talking about in the automotive space, that there are going to be short-term fluctuations, but the crossover to EVs and hybrids is something that it's a question of like when, not if, that is going to happen and the amount of compute power in cars and other electronics in cars is going to continue to increase the attach rate of more chips per car shipped. So they have long-term plans to drive capacity and they have long-term plans for purchasing our equipment that we think is going to be important. So we are cautious about the current downturn that we're seeing in automotive, but we're really confident about the long-term potential in that space, especially parts of it where we have a ton of good share and great customer relationships like battery management, discrete in power and more and more importantly ADAS stuff. So right now I think the utilization in auto and industrial is down, but what the signals that we're hearing from those customers is that they expect that to be relatively short lived.

Toshiya Hari: Got it. That's really helpful. Thank you. And as a followup on the robotics side, your point about AI helping your UR business and the MiR business makes intuitive sense to me. I just have a hard time sort of thinking about the timing and sort of the magnitude of that kicking in. You mentioned backlog for your new MiR product being pretty significant into Q4. Maybe we start to see benefits there, but on the UR side, what kind of applications should we be looking out for as it pertains to AI helping that business? And again, at what point does sort of the contribution of AI start to really show up in numbers? Thank you.

Greg Smith: Okay, so there's a lot to unpack there, so let's get down to it. So the story for MiR is pretty simple, that take a robot, add AI capability, and suddenly you have a robot that works better. That's our basic hypothesis behind the pallet jack, is that we're going to be able to have a higher success rate picking pallets than competing solutions. And so far, the customer reception is that they think that those claims have some merit. So we have a pretty strong backlog for a product that we're going to start shipping in Q4 of this year. So that's pretty simple. For UR, the story is a lot more complex because what we're really doing is creating a platform for our solution providers to build AI based solutions on. And there's actually like four chunks of an AI based solution on UR. At the bottom, you have our robot and the software that controls our robot. And then on top of that, there's AI toolkits that can come from Nvidia or can come from other providers that really give the primitives that allow people to use AI capabilities to solve problems. Then on top of that, there's usually a solution builder. And so what that solution builder will do is they'll take our robot and that toolkit and they will build a solution to do something like heterogeneous bin picking or vision based inspection or welding, and then they will take that solution and they will market it to their end customers. So the key thing that differentiates the UR platform from other robots is its features as a platform. So the APIs that people can use, the features that they need in order to build these solutions for, and that's what makes us sticky, is that once a solution provider builds a solution around a specific toolkit in our robot, it's tough for them to move off. The thing about that model for UR is that it's a slower burnt. That it's an indirect AI drives our business indirectly because we're not building the AI solution, our solution providers are. So I'll tell you that we have AI based solutions in the market. Right now, our estimate is that high single digits of UR sales are going into AI based applications that are in the market right now. So that's sort of our baseline and we intend to grow from there. These solution providers, it can take a while from when they begin building their solution to when they see a commercial inflection and that's often in excess of a year. So we have a great pipeline of partners that are using AI right now to try and build solutions and we would expect that to deliver material revenue in 2025, but not in 2024. So sorry for going deep, but you kind of hit a nerve.

Toshiya Hari: Thank you for all the details.

Operator: The next question comes from Joe Moore of Morgan Stanley (NYSE:MS). Please go ahead.

Joseph Moore: Great, thank you. I wonder if you could talk about the HBM test in particular. I'm just curious, as we move from HBM3 to HBM3E and then later to HBM4, can you talk about how much S3 use there's going to be versus upgrade requirements?

Greg Smith: Okay. So on HBM, the primary difference from a test perspective, as you go from HBM3 to HBM3E to HBM4, is the data rates that are required in the performance test of the final HBM product and the capacity that's in place right now for HBM3, most of it, essentially all of it, is incapable of testing at the data rates required for HBM3E and HBM4. So the people that are building HBM3E are seeking additional capacity. They're essentially retooling to be able to test the HBM3E. Now, this is one of the areas where we believe we have an advantage that will allow us to gain share in HBM performance test, that we have a tester that is going to be effective for both HBM3E and HBM4. And so that essentially will give customers that adopt that solution longer asset life than if they were to adopt a competing solution. So we are pretty hopeful about our opportunity to gain share in HBM performance test and we're working on essentially benchmark competitions in multiple customers to try to prove that.

Joseph Moore: Great, thank you very much.

Operator: The next question comes from Samik Chatterjee of JPMorgan Chase (NYSE:JPM) & Co. Please go ahead.

Samik Chatterjee: Hi. Thank you for taking my questions. I guess for the first one Greg, if I can go back to one of the comments that you made about the compute time for next year when you were comparing compute versus mobility and your expectations for next year. I'm just wondering, you said compute to be robust, but remain at these strong levels. We've seen the compute TAM go from, I think, 1.2 to 1.6 this year. Are you implying that we sort of 1.4 to 1.6? I'm sorry and are you implying you sort of hold around this 1.6 level or a similar increase that you're seeing this year. And what should we think about what's incorporated in that for the portion of the market that's sort of associated with the VIPs and growth outlook for them in 2025 in that number?

Greg Smith: So I think it'd probably be a good idea to do our TAM history lesson in compute as well, so really strong this year. Why don't we go back a couple of years and set that as context, and then we'll bracket kind of what we think we'll do in 2025. So, Sanjay, could you do that?

Sanjay Mehta: Sure. So let me give some more context. So 2019, the compute TAM, our view was about $600 million. Fast forward, we went to nearly double that in 2021, between $1.1 billion and $1.2 billion. And then in 2022, it went to $1.3 billion and as you noted, 2023 at approximately $1.4 billion and this year at the midpoint, our view is $1.6 billion.

Greg Smith: So as you look into 2025, we don't think that we would see mammoth increases to the compute TAM. It is between 2x and 3x larger than it was in 2019 at this point in time. And for sure, people are trying to add capacity all through the production chain, but it's coming off of a really high base. So looking forward into next year, I would probably be looking at where we are this year, plus or minus something, versus a much -- a lot of increase in the compute space. Now, you asked about VIPs. Right now, VIPs are towards the low end of a $100 million to $200 million range. It could trend towards the high end of that by the end of this year. We think that by the time we get out to 2026, VIPs will be about $500 million of the overall compute spend. So I think that's a pretty exciting chunk. That could be a quarter to a third of the compute TAM could be driven by VIPs.

Samik Chatterjee: Got it. And for my followup, I know you're reiterating your 2026 plan today, which still sort of implies a 20%, 25% CAGR for the next couple of years. I'm just trying to compare that with the exit run rate this year that you have in terms of growth. Even when I add back Technoprobe and the impact of that, it sort of is in that sort of 10% to 15% range. Can you help me just think about how to think about the impact that the underutilization and mobility is having on your revenue, just to think whether, how do you bridge the gap from this 10% to 15% in the back half to maintaining a 20%, 25% CAGR for the next couple of years?

Greg Smith: So I guess the best thing to say is that at the point in time, there are two things that are going on since we set our plan. One is that the amount of underutilized capacity was larger than we thought at the point that we built our plan. The other thing that's happened since we built our plan is that even in 2024, compute has strengthened by a couple $100 million that the sort of the underlying demand drivers in the market are stronger than we were forecasting. So when you balance the deeper hole of utilization and the stronger end market demand then I think our hypothesis for 2026 holds.

Sanjay Mehta: Maybe I'll just add a little bit. When we take a look at our model, as Greg noted earlier, mobility comes back. But let me remind also what he said. It doesn't come back to the peak levels, comes back to kind of a regular level, but mobility comes back. The trends in automotive, with more silicon going in, combustible engines, the conversion to EV and battery management systems is another tailwind and industrial comes back coupled with the compute. And I'll remind you that our Robotics business had a 20% to 30% growth in there as well. So that's kind of how you get there.

Samik Chatterjee: Yep. Thank you. Thanks for taking the questions.

Operator: The next question comes from Brian Chin of Stifel. Please go ahead.

Brian Chin: Hi there. Good morning. Thanks for letting us ask a few quick questions. Greg, may be just curious, in Q2, in compute and memory, which obviously drove a lot of that sequential strength, was there any shipment pull in from second half or 3Q?

Greg Smith: I'll actually let Sanjay answer that one.

Sanjay Mehta: Yes, Brian, we did see acceleration from Q3 into Q2. Customers were pulling. And that's in my view we have a full year view and Semi Test is a little bit stronger, as I noted earlier. Customers are pulling and the demand is there. And we see a fairly strong backlog going into Q3 with kind of low turns. So we're in a, I think from a compute and memory perspective, yes we did see some acceleration.

Brian Chin: Okay, great. That's helpful color. And then may be just thinking about the service and software opportunity in Robotics is small today. But just curious, can you sort of size up the active installed base of UR and mobile robots in the field and what their typical useful life is? And how big could service and software be as a percent of revenue by 2026?

Sanjay Mehta: Yes, so, rough numbers here, but we have on the order of 80,000 UR cobots out in the field, and probably on the order of 10,000 or more AMRs. The useful life of them is, we have cobots that were delivered before Teradyne bought Universal Robots that are still being used, but most of our customers will depreciate the asset over about a five-year period. So, I think if you're trying to model sort of installed base decay, it's not a bad idea to look at maybe a five to seven-year life. So, I think, and you're going at this exactly the same way that we're thinking about, that we look at the entire installed base, not just new equipment sales as our total available market service agreements. And we're also doing this service agreement build in alignment with the build out of our large account channel. So large accounts are the ones that are most likely to have large fleets and are most likely to see advantage from a managed service plan and that's another sort of aspect to the strategy that we're building out.

Brian Chin: Okay, great. Thank you.

Operator: The next question comes from Atif Malik of Citi. Please go ahead.

Atif Malik: Hi. Thank you for taking my questions and thank you for providing the history lesson on the TAM on Slide 13. A quick one, the mobility weakness, fair to assume that is on the Android side?

Greg Smith: The mobility weakness is really both Android and iOS. If you look across the major suppliers for silicon for all of those ecosystems, it's generally pretty weak. Now, if you peel it back a little bit under the covers, there are some areas of the mobile space that have done better during this downturn than others. So one aspect of it is in image sensor, that the transition to, like 48 megapixel image sensors really put some pressure on the suppliers in that space, and they've added capacity both in iOS and Android land. The other is the improvements in wireless charging and other charging aspects that even now, when we've seen significant weakness in power and linear, we're still seeing some incremental demand as people always want their phones to charge faster. They want them to charge faster on wireless charging. So, we're seeing increased silicon content there. So it's been a little bit of a bright spot within that market. So, I think we've seen broad-based weakness in 2023 and continuing into 2024, and we expect to see relatively broad-based recovery in 2025.

Atif Malik: Great. As my followup for Sanjay, you've talked about full year gross margins 58% to 59%. And if you were to assume that the mobility and compute becomes larger at your large customer next year, all else being equal, like auto, industrial, how will that impact the gross margin profile for next year?

Sanjay Mehta: Yes, so we're happy with this year's gross margin performance kind of playing out as we expected. A little bit better though, in the first half, but 58% to 59% with continuous improvement. And I would say that, regarding next year, obviously, we'll provide a little bit more color in January. But the way I'd think about it is, we do expect revenues to grow, so we'll have a bit of a tailwind tied to volume. And it really depends in those segments you referred to as what specifically the customer is ordering. It depends on the configurations of the instruments. And so, I think, in my view, I think that we're exiting the year at our model. That's what we expect and look forward to giving you more of an update in January for 2025. But I would leave you with a higher volume level, it should help as tailwind.

Atif Malik: Good enough. Thank you.

Operator: Our next question comes from Steve Barger of KeyBanc Capital Markets. Please go ahead.

Steve Barger: Hey, good morning. Thanks for stretching the call. Greg, you talked about all the growth opportunities for both test and robotics for 2025 and 2026, and I wanted to tie that back to the accelerated OpEx investments. Is that increased spend supporting everything we've talked about today or there are also new products you're planning on that add to the existing lineup?

Greg Smith: So, I will tell you that our OpEx acceleration is in both R&D and in our sales and marketing expenses. So you can infer from that that means that we're working on new products and we're working on building relationships with new customers and trying to capture. The key thing in semiconductors is that once customers make a platform decision, then it becomes very, very difficult to change their direction. And so we see a fleeting opportunity with all of the new VIPs to get in the door and influence that initial platform decision. So we're going to take those opportunities and we're going to make the investments to try to capture them while that share is available versus trying to move it after the cement sets. The one thing I will say is that the focus of our acceleration is really in our test business that we see that we have. We're confident in our strategy in Robotics, and we're confident for the OpEx plan that we put together. We saw no need to pour on more OpEx in our Robotics business. We're going to execute the plan that we set. But in the test business, especially in our semiconductor test business and in the system level test business, we saw an opportunity by accelerating our spend that we would be able to drive a better outcome long-term. So that's where that money's going.

Steve Barger: Understood. And just one last one. You said there's good customer uptake in industrials for services, but not a lot of revenue yet. Is that because the new customers are not taking all of what you offer or why is revenue not tracking uptake?

Greg Smith: So it is mainly because the rollout of those programs. We're trying to make sure that we can walk before we run when it comes to these service programs. So we have essentially piloted the programs in a relatively small region and we're seeing good results in that region, but we have not deployed the program worldwide because we have to build out the infrastructure to support it. So that's why I say that we haven't seen material uptake is just because it isn't globally deployed at this point.

Steve Barger: Does that happen in the back half of this year or more 2025 a global rollout?

Greg Smith: Oh, definitely 2025. So in the back half of this year, we're going to be -- and also the sales cycle time for the service business is it's not terribly long, but it's probably a couple of quarters because you have to establish the value for the managed service plan. So we have a lot of interest. We are talking to a lot of customers, but we haven't closed the deals yet, because I think some of it is that it needs to be incorporated into their 2025 budgets. So, I'm very hopeful that we'll see an inflection in service revenue in 2025. I don't think we'll see much in terms of revenue in 2024.

Steve Barger: Understood, thanks.

Operator: The next question comes from Gus Richard of Northland Capital. Please come ahead.

Gus Richard: Yes, thanks for taking the question. I'm just curious, in terms of the jump balls with the vertically integrated producers, where's your win rate? How much of that business do you guys think you're picking up?

Greg Smith: So our win rate on sockets, when we started describing our plans in VIPs, we said that we were trying to make sure that we got at least sort of an even split of sockets. And right now in 2024, that's kind of how it's playing out, that we're getting our fair share of wins. The other way that we're looking at this is in terms of testers loaded. So we're not looking at it in terms of tester purchases because of the underutilization, but we are trying to count noses in terms of how many testers are being loaded by our customers versus testers being loaded by our competition's customers. And right now I would say that we are kind of 60/40 in favor of Teradyne in terms of testers loaded for VIP customers.

Gus Richard: Got it. That's helpful. And then the follow on is, thinking about your investment in Technoprobe, how is that helping your effort to expand your market share in these jump balls?

Greg Smith: So right now it's not having a significant effect. The key thing that we are trying to do in the joint development projects that we have with Technoprobe is to take on relatively hard problems that required collaboration between us and Technoprobe that unless we had a firm partnership, we'd be unwilling to take that risk on speculation. We have initiated those projects, but they do require technology development on both sides. So right now, what we said at the point in time when we announced the deal is that we thought this would have a low-single-digit, long-term effect on market share in the Semi Test space. We still think that that's true and we think that we're on track to achieve those gains.

Gus Richard: Yes. And just to be clear, are these the VIPs or the existing wins and losses that have already happened? Do you think it can increase your penetration in areas where decisions have already been made?

Greg Smith: So we haven't publicly announced sort of what segments of the market we are doing these joint development projects, because we think that we need to keep that relatively proprietary until we have demonstrated the success. But I will say that the key things that we believe are enabled by the projects that we're working on with Technoprobe are around devices that have very high power requirements and also devices that have very high parallelism. So the TPI probe technology is unlocking sort of the high end scalability of our test platforms in both SoC and memory. And we think that that's going to result in share gain by sort of opening up a place where both TPI and Teradyne are differentiated from their competition.

Gus Richard: Got it. Thank you, very helpful.

Operator: Thank you. Ladies and gentlemen, we have reached the end of the question-and-answer session. I will now hand over to Traci Tsuchiguchi for closing remarks. Thank you.

Traci Tsuchiguchi: Thank you all for joining us this morning. We look forward to seeing many of you through the course of the quarter and until then, have a great morning. Bye.

Operator: Thank you. Ladies and gentlemen, that concludes today's event. Thank you for attending and you may now disconnect your lines.

This article was generated with the support of AI and reviewed by an editor. For more information see our T&C.

Latest comments

Risk Disclosure: Trading in financial instruments and/or cryptocurrencies involves high risks including the risk of losing some, or all, of your investment amount, and may not be suitable for all investors. Prices of cryptocurrencies are extremely volatile and may be affected by external factors such as financial, regulatory or political events. Trading on margin increases the financial risks.
Before deciding to trade in financial instrument or cryptocurrencies you should be fully informed of the risks and costs associated with trading the financial markets, carefully consider your investment objectives, level of experience, and risk appetite, and seek professional advice where needed.
Fusion Media would like to remind you that the data contained in this website is not necessarily real-time nor accurate. The data and prices on the website are not necessarily provided by any market or exchange, but may be provided by market makers, and so prices may not be accurate and may differ from the actual price at any given market, meaning prices are indicative and not appropriate for trading purposes. Fusion Media and any provider of the data contained in this website will not accept liability for any loss or damage as a result of your trading, or your reliance on the information contained within this website.
It is prohibited to use, store, reproduce, display, modify, transmit or distribute the data contained in this website without the explicit prior written permission of Fusion Media and/or the data provider. All intellectual property rights are reserved by the providers and/or the exchange providing the data contained in this website.
Fusion Media may be compensated by the advertisers that appear on the website, based on your interaction with the advertisements or advertisers.
© 2007-2024 - Fusion Media Limited. All Rights Reserved.