Applied Materials, Inc. (NASDAQ:AMAT) has reported a solid performance in the second quarter of fiscal 2024, showcasing a stable growth trajectory and strategic positioning to capitalize on long-term industry trends. The company has demonstrated consistent growth in key financial metrics, including revenue, earnings per share (EPS), and free cash flow. With a focus on semiconductor technology innovations and a robust service business, Applied Materials is well-placed to benefit from the rising demand in areas such as gate-all-around logic nodes, high-performance DRAM, and advanced packaging. The company anticipates significant revenue from these technologies soon and is committed to delivering value through materials engineering and services.
Key Takeaways
- Applied Materials reported stable revenue, EPS, and free cash flow growth in Q2 of fiscal 2024.
- The company is poised to capitalize on long-term growth trends with innovations in semiconductor technologies.
- Applied Materials' service business is experiencing strong growth, driven by subscriptions and long-term agreements.
- The ICAPS business is fueled by megatrends such as edge computing, electric and autonomous vehicles, and renewable energy.
- The company expects China's revenue to normalize to around 30% of total revenue by year-end.
- Applied Materials aims to over-deliver relative to the market and gain share in key inflections.
Company Outlook
- Applied Materials expects to generate significant revenue from gate-all-around technology and advanced packaging in the near future.
- The company's capital allocation strategy remains focused on R&D, capital infrastructure, dividend growth, and shareholder returns.
- Applied Materials is set to attend upcoming conferences, indicating continued market engagement and visibility.
Bearish Highlights
- DRAM shipments to China are expected to decline, with Q3 seeing a significant drop and Q4 revenue close to zero.
- The NAND business is currently slow, though growth is anticipated over time.
Bullish Highlights
- The service business has achieved 19 consecutive quarters of year-over-year growth.
- The company sees an opportunity to add more value with its services, especially as customers move into new locations.
- Applied Materials expects to grow its CFE systems revenue around 4 times by 2024, accounting for 50% of eBeam system sales.
Misses
- Executives did not provide specific details on revenue split between different technologies or regions.
Q&A highlights
- Brice Hill discussed the normalization of China's revenue to about 30% and the strength in smartphone, PC-related products, image sensors, power chips, and microcontrollers.
- Gary Dickerson highlighted the company's broad portfolio to support gate-all-around technology and significant expected growth in backside power delivery revenue post-2025.
- The company expressed optimism about the growth potential of their PDC business and anticipated increased wafer starts across various segments.
Applied Materials' earnings call has painted a picture of a company that is strategically navigating the semiconductor landscape with a clear focus on innovation and growth. As the global markets continue to evolve, Applied Materials' commitment to technology development and customer collaboration positions it as a key player poised to benefit from the next wave of device architecture inflections.
InvestingPro Insights
Applied Materials, Inc. (AMAT) has shown resilience and strategic acumen in its Q2 fiscal 2024 performance, underpinned by solid financials and a promising outlook in the semiconductor sector. To further understand Applied Materials' market position and investment potential, let's consider some real-time data and InvestingPro Tips.
InvestingPro Data highlights the company's market capitalization at a robust $177.84 billion, reflecting its significant presence in the industry. Despite a high Price/Earnings (P/E) ratio of 25.21, which may suggest a premium valuation, this could be indicative of investor confidence in the company's future earnings potential. The P/E ratio has adjusted slightly to 25.39 over the last twelve months as of Q1 2024. Additionally, the company's revenue growth remains stable, with a slight increase of 0.88% over the last twelve months as of Q1 2024.
InvestingPro Tips shed light on the company's financial prudence and investor rewards; Applied Materials has a commendable track record of raising its dividend for 6 consecutive years and has maintained dividend payments for 20 consecutive years. This demonstrates a commitment to returning value to shareholders and a stable financial position that can support these payouts. Furthermore, the company's status as a prominent player in the Semiconductors & Semiconductor Equipment industry is not to be understated, as it continues to innovate and capture market share in a highly competitive landscape.
For investors seeking more comprehensive analysis and additional insights, InvestingPro offers a wealth of tips, including details on Applied Materials' volatility, cash flow stability, debt levels, and much more. In fact, there are 16 additional InvestingPro Tips available for AMAT, which can be accessed at: https://www.investing.com/pro/AMAT. For those interested in a deeper dive, use the coupon code PRONEWS24 to get an additional 10% off a yearly or biyearly Pro and Pro+ subscription, enriching your investment research with expert analytics and real-time data.
Full transcript - Applied Matls Inc (AMAT) Q2 2024:
Operator: Welcome to the Applied Materials Earnings Conference Call. During the presentation, all participants will be in a listen-only mode. Afterwards you will be invited to participate in a question-and-answer session. I would now like to turn the conference over to Michael Sullivan, Corporate Vice President. Please go ahead, sir.
Michael Sullivan: Good afternoon everyone, and thank you for joining Applied's second quarter of fiscal 2024 earnings call. Joining me are Gary Dickerson, our President and CEO, and Brice Hill, our Chief Financial Officer. Before we begin, I'd like to remind you that today's call contains forward-looking statements which are subject to risks and uncertainties that could cause our actual results to differ. Information concerning the risks and uncertainties is contained in Applied's most recent Form 10-Q filing with the SEC. Today's call also includes non-GAAP financial measures. Reconciliations to GAAP measures are found in today's earnings press release and in our quarterly earnings materials, which are available on our website at ir.appliedmaterials.com. Before we begin, I have a calendar announcement. On Tuesday morning, July 9th, from 7:30 to 9 a.m., Applied will host a technology breakfast event at Semicon West in San Francisco. Joining us will be Dr. Prabu Raja, President of Applied's Semiconductor Products Group, along with Mark Fuselier, who is Senior Vice President of Technology and Product Engineering at AMD (NASDAQ:AMD). After Mark shares AMD's AI computing technology vision, Applied's experts will share our advanced materials engineering roadmap for making future AI chips. We'll outline device architecture inflections in logic, including transistors, frontside wiring and backside power, along with DRAM, high-bandwidth memory, and other forms of advanced packaging. We hope you'll join us. And with that introduction, I'd like to turn the call over to Gary Dickerson.
Gary Dickerson: Thank you, Mike. With second quarter revenue and earnings towards the high-end of our guided range, Applied Materials continues to deliver strong performance in 2024, and we are in a great position to benefit from secular growth trends over the longer-term. Semiconductors are the foundation of huge technology trends reshaping the global economy. These trends are driving demand for more chip manufacturing capacity, as well as better chips with higher performance and improved energy-efficiency. Key inflections that underpin the semiconductor roadmap are enabled by Applied Materials and will support our ongoing outperformance as next-generation chip technologies move into high-volume production. In addition, the complexity of implementing the industry's roadmap and bringing new semiconductor technologies to market is driving earlier, deeper and broader collaboration with customers, as well as supporting double-digit growth for our service business. In my prepared remarks today, I'll provide some examples of how Applied's innovations are helping to enable multi-trillion-dollar technology inflections, including AI. I'll explain how this translates to our performance in the near-term, and our future growth potential. I'll also describe how we are working with our customers and partners to accelerate major semiconductor inflections all the way from research and development to high-volume manufacturing, and by doing this, how we are capturing more value in our service business. I'll start with a big picture perspective. Tectonic shifts in technology, including AI, IoT and automation, electric and autonomous vehicles and clean energy, will transform virtually every area of the economy over the next several decades, and they all have one thing in common. They are built upon semiconductors. As these new technologies are deployed, they are driving growth and innovation across the semiconductor ecosystem. In terms of impact and scale, I believe AI will be the biggest technology inflection of our lifetimes. And at the heart of AI are some of the world's most sophisticated chips. In simple terms, the advanced chips that power AI datacenters are enabled by four key semiconductor technologies: leading-edge logic; compute memory or high-performance DRAM; DRAM stacking technology, referred to as high-bandwidth memory, or HBM; and advanced packaging to connect the logic and memory chips together and create a 'system in a package'. Applied has process technology leadership in all four of these areas, and we have made significant investments in next-generation solutions to make possible the key device architecture inflections that are essential for our customers' future roadmaps. In advanced logic, Applied has long-standing leadership in the materials engineering processes for both transistors and interconnects. The first nodes that use gate-all-around transistors are now transitioning to high-volume manufacturing. These new transistor process flows are considerably more complex, and the shift from FinFET to gate-all-around grows Applied's available market for the transistor module from around $6 billion to approximately $7 billion for every 100,000 wafer starts per month of capacity. With the gate-all-around transition, we are also gaining share and we are on track to capture over 50% of the process equipment spending for transistor steps. We also have very strong market share in interconnect, or the wiring used to transmit data at high speed and low power. Our available market for the wiring steps is approximately $6 billion for each 100,000 wafer starts per month, and we expect it to grow by $1 billion when Backside Power Delivery is introduced into volume manufacturing. Overall, we expect to generate more than $2.5 billion of revenue from gate-all-around nodes this year and potentially more than double that in 2025. In DRAM, one of the key approaches that memory makers are using to improve performance and power consumption is to implement logic technologies in the peripheral circuitry. Our deep capabilities in logic, combined with our strong position in DRAM patterning and our unique, co-optimized hard mask solutions for capacitor scaling, makes us the clear leader in process equipment for DRAM today and best positioned for future growth. In the critical die-stacking technologies used in high-bandwidth memory, we also have strong leadership positions, including in micro-bump and through-silicon via. Last quarter, we said that we expected our HBM packaging revenue to be 4 times larger in 2024 than in 2023. As we have recently seen customers accelerate their capacity plans for HBM, we now believe that our revenue could be 6 times higher this year, growing to more than $600 million. Across all device types, we now expect revenue from our advanced packaging product portfolio to grow to approximately $1.7 billion this year. Looking further ahead, we see opportunities for this business to double again, as heterogenous integration is more widely adopted, beyond the AI datacenter, and we introduce new products that expand our served market. AI datacenter is just one example that illustrates how the major inflections that underpin the next generation of semiconductors are enabled by Applied Materials. Materials science and materials engineering are increasingly important to the industry's roadmap. Applied has invested early to develop a broad, unique, and connected portfolio of materials engineering solutions that are critical to enable major semiconductor inflections from AI high-performance computing to ICAPS edge computing. We are translating those investments into consistent outperformance. Recent TechInsights data confirms that in 2023 Applied grew faster than the wafer fab equipment market for the fifth year in a row. We accomplished this despite headwinds created by trade rules that we estimate restricted us from more than 10% of the China market during that period. While we have gained share overall, we are growing share within our served market even faster. This is important, because as logic devices become more three dimensional, future generations of DRAM come to market and advanced packaging becomes more prevalent, we expect materials engineering to become an even larger portion of overall wafer fab equipment. Another key component of Applied's strategy is to address the increasing complexity faced by the industry. First, we are driving earlier, deeper and broader collaboration with customers and partners. We are changing the industry's innovation model with the goal to accelerate mutual success rates and increase investment efficiencies. Our global EPIC platform, that we will build out over the next several years, is specifically designed to support high-velocity innovation and commercialization of next-generation technologies. Second, we are able to provide more complete and connected solutions that accelerate major device inflections. The portion of our revenue generated by integrated solutions has grown from approximately 20% in 2019 to 30% today. We expect demand for these fab-in-a-fab-type solutions to continue growing, both at the leading-edge and from our ICAPS customers who are serving specialty IoT, communications, auto, power and sensor applications. And third, we are helping customers transfer new technology into high-volume manufacturing faster and then optimize performance, yield, output and cost in their factory operations. This is supporting double-digit growth of our service business. AGS delivered a new record for revenue this quarter, $1.5 billion, with a significant portion of this coming from subscriptions in the form of long-term service agreements. Before I hand over to Brice, I will quickly summarize. Applied Materials continues to deliver strong performance in 2024 and we are in a great position to benefit from secular growth trends over the longer-term. Tectonic shifts in technology, including AI, IoT, EVs and clean energy, that are reshaping the global economy are built on semiconductors, driving demand for more chips and new chips with higher-performance and better energy-efficiency. Key device architecture inflections that underpin the semiconductor roadmap are enabled by Applied Materials. We expect this to support our ongoing outperformance as next-generation chip technologies, including gate-all-around logic nodes, high performance DRAM and HBM and Advanced Packaging (NYSE:PKG), move into high-volume production. And finally, the increasingly complex industry roadmap is driving earlier, deeper and broader collaboration between Applied Materials and our customers and partners, accelerating demand for our most advanced co-optimized and integrated solutions and supporting double-digit growth in our service business. Now, I'll hand over to Brice.
Brice Hill: Thank you, Gary. And I'd like to thank our teams for their focus and execution, which resulted in another strong quarter for revenue and gross margin. Today, I'll discuss our overall business environment and share insights into our ICAPS business which serves the IoT, communications, auto, power and sensor markets. I'll describe our capital allocation strategy and operating model, demonstrating how we are driving profitable growth and attractive shareholder returns. I'll also summarize our Q2 results and provide our guidance for Q3. In calendar Q1, the global market for semiconductors grew 15% year-over-year and we are optimistic that the data center trends Gary outlined will help drive solid growth for the semiconductor industry. During the quarter, cloud service providers announced strong capital spending plans which is good news for our customers. In the market briefing we issued earlier this month, we forecast that the data center market will eventually become the number one driver of leading-edge foundry-logic wafer starts, surpassing PCs and then smartphones in the coming years. Within our business, we had a strong quarter in fiscal Q2 across DRAM, advanced packaging, ICAPS and services. In February, we projected that factory utilization would increase across all device types, and it did. Gary discussed how the data center AI megatrend is driving strong demand for our technologies used in leading-edge logic, DRAM, high-bandwidth memory and other forms of advanced packaging. Our ICAPS business is driven by three additional megatrends, notably IoT and edge computing, electric and autonomous vehicles and renewable energy. Across our ICAPS business, one of the largest demand drivers this year is edge computing, especially at the 28-nanometer node needed by smartphone companies and makers of IoT devices for industrial and home automation applications. A second large demand driver is power chips for electric vehicles where industry leaders are now establishing supply chains to support their long-term growth plans. A third driver is the power chips used to capture renewable solar and wind energy which are needed to achieve Net Zero goals in the decades ahead. We believe our ICAPS business will remain a large portion of our overall foundry-logic business for several reasons. One, the megatrends we described will continue to increase unit demand for ICAPS chips. Two, we are innovating at the device level which creates better chips, stimulates new system sales, and extends Applied's position as the highest-value partner for our customers. And finally, we are introducing ICAPS products in additional market segments which will help us broaden our reach and gain share. Next, I'll summarize our capital allocation strategy and the results it enables. Our efficient business model generates healthy free cash flow. Our first priority is investing in R&D and capital infrastructure to enable profitable growth. And our second priority is growing our dividend per share and using our buyback program to distribute excess free cash flow to shareholders. Specifically, over the past 10 fiscal years, we have reinvested more than $20 billion in R&D and over $5 billion in capital additions and distributed more than 90% of free cash flow to shareholders. Our capital allocation strategy supports our operating model, which I'll summarize. First, we invest over $3 billion in R&D each year collaborating closely with our customers to invent new semiconductor technologies that are critical to their competitive positions in the global megatrends we've described. Second, we design high-volume manufacturing systems that enable our customers to deploy these new chip and advanced packaging technologies at global scale. Third, we manage a global factory and supply chain network to manufacture these systems. Fourth, we service our systems which have decades of useful life helping customers maximize their return on investment by accelerating ramps and optimizing output, yield and cost. Fifth, we reinvest a high percentage of the profits from this activity back into R&D to develop more new technologies and solutions. And finally, we distribute excess cash to shareholders. An important point is that every tool we manufacture and ship grows our installed base and our service opportunity, which leads to consistent and stable growth for Applied Global Services. In fact, AGS has delivered 19 consecutive quarters of year-over-year growth spanning two memory downcycles. Over 80% of AGS revenue comes from recurring services and parts sales, about two-thirds of which is delivered under long-term service agreements that have a 90% renewal rate. Connecting this to our capital allocation strategy, AGS has continued to produce more than enough operating profit to fully fund our growing dividend. In March 2023, we announced a 23% increase in our dividend per share, and in March of this year, we announced a 25% increase. In summary, over the past ten fiscal years, our operating model has increased company revenue at a compound rate of over 13%, non-GAAP EPS at nearly 30%, free cash flow at 33%, and dividends per share at nearly 12%. Also over this period, we reduced net shares outstanding by over 30%. Now I'll summarize our Q2 results. On a year-over-year basis, net sales grew slightly to nearly $6.65 billion, non-GAAP gross margin grew 70 basis points to 47.5%, non-GAAP OpEx grew 5% to $1.23 billion, and non-GAAP EPS grew 4.5% to $2.09. Turning to segment results, Semiconductor Systems revenue remained strong at $4.9 billion and included record ion implant sales. Segment non-GAAP operating margin was 34.9%. Applied Global Services revenue increased 7% year-over-year to $1.53 billion, and segment non-GAAP operating margin was 28.5%. Our tools under subscription agreement increased by 8% year-over-year and our installed base of chambers surpassed 200,000 for the first time. Moving to Display, Q2 revenue was $179 million, and segment non-GAAP operating margin was 2.8%. We are becoming more confident that the OLED technology found in smartphones will be adopted in notebook, PCs and tablets, whose larger screen sizes would spur an increase in capital investments. Turning to cash flows, in Q2, we generated nearly $1.4 billion in operating cash flow and nearly $1.14 billion in free cash flow. We distributed nearly $1.1 billion to shareholders, including $266 million in dividends and $820 million in buybacks. We repurchased 4.1 million shares at an average price of $197.77. Now, I'll share our guidance for Q3. We expect revenue of $6.65 billion, plus or minus $400 million, and non-GAAP EPS of $2.01, plus or minus $0.18. Within this outlook, we expect Semi Systems revenue of around $4.8 billion, AGS revenue of about $1.57 billion, and Display revenue of around $245 million. We expect non-GAAP gross margin to be approximately 47%, and non-GAAP operating expenses to be around $1.26 billion. Finally, we are modeling a tax rate of 12.3%. Thank you, and now Mike, let's begin the Q&A.
Michael Sullivan: Thanks, Brice. To help us reach as many people as we can, please ask just one question on today's call. If you have another question, please re-queue, and we'll do our best to come back to you later in the session. Operator, let's please begin.
Operator: Certainly. And our first question comes from the line of CJ Muse from Cantor Fitzgerald. Your question, please.
CJ Muse: Yeah, thank you for taking the question. I guess we'd love for you to talk about your visibility today and how your ongoing conversations are going with your large customers as it pertains both to your outlook for kind of second half versus first half on a calendar basis, as well as building that potential backlog into calendar '25. Thank you.
Gary Dickerson: Okay, great. Hi, CJ. Thanks for the question. So, when we look at our business, and think about the largest customers as we look at Q3 and our guidance for Q3, we know that the DRAM shipments that we've had for China that we called out that were fairly high in Q1 and Q2 are falling off in the second half. And what we've been expecting is that ICAPS strength and leading-logic strength would backfill that drop-off in DRAM. And that's exactly what we see happening in Q3. And that's consistent on the leading-logic side with the advent of gate-all-around process technology and equipment beginning to ship earnest -- in earnest for the HVM ramp that will be upcoming, and I think that's a good indication of what we're expecting in the second half. We talked about whether leading-logic and ICAPS would be able to fill in for the drop-off in China DRAM, and that's exactly what we see in Q3. And then, when we look ahead to '25, we'll point to the same fundamental ramp for leading-logic. That will be gate-all-around. Gary highlighted in his remarks that we expected $2.5 billion of business related to gate-all-around shipments in '24. And we expect to be able to grow that significantly in '25 as that process technology ramps towards HVM, high-volume manufacturing.
Operator: Thank you. One moment for our next question. And our next question comes from the line of Stacy Rasgon from Bernstein Research. Your question, please?
Stacy Rasgon: Hi, guys. Thanks for taking my question. Brice, I wanted to -- and Gary, I wanted to follow up on that sort of qualitative 2025 outlook. So, I guess, I heard you right, you said $2.5 billion gate-all-around this year, doubling next year or more. So, $2.5 billion of incremental year-over-year growth from gate-all-around, it sounds like you said the advanced packaging had the opportunity to double again over time, so that should be growing. HBM, theoretically, should be growing. ICAPS, I know has been a little weaker than it was. It feels like it's bottomed just given what we're seeing, that ought to grow. And I mean NAND flash is -- for you guys is pretty close to zero right now as well, so [indiscernible]. I mean, how do I think about like -- you've talked about over-delivering versus the market. Like let's say the WFE market was flat next year, given those drivers, how would I think about how you guys could grow relative to a market like that given those drivers?
Brice Hill: Yeah, thanks, Stacy, for the question. So, the way -- our perspective, we start with the longer-term view. And as Gary described, we're investing in the key inflections for the fastest-growing markets. And so, our perspective, if you stand back and think over many quarters or the next several years is that the leading-logic technologies like gate-all-around and backside power, the advanced packaging, HBM memory, our services business, we think all of those will grow faster than the average market and will help us gain share. And so, it's harder to call any particular quarter or a short time period in the near future, but that would be our perspective. And I think from a ICAPS perspective, you called out gate-all-around and ICAPS and DRAM and NAND, I think, thinking about all of them. We've talked about our DRAM share having improved over 10 percentage points over the last 10 years. And we expect that technology has great tailwinds. We talked about how HBM and utilization in DRAM is improving. So that's a positive. And if we think about ICAPS, the market, we have three quarters here that you can see, two -- our first two that are closed and our Q3 guidance, and ICAPS is very strong in those quarters and grows in Q3 to fill in some of that China DRAM business that drops off. And then finally, gate-all-around, the $2.5 billion that Gary highlighted, that's not just the incremental, that's our shipments for the entire business that are associated with gate-all-around that are shipping this year, and we do expect that to grow next year.
Gary Dickerson: Stacy, this is Gary. Really, the big focus for us is enabling and winning major device architecture inflections. So, when you break out all of these different device segments, certainly, foundry-logic leading-edge, the opportunity there for us to grow is significant because we have a very high share of those big inflections. The gate-all-around, backside power delivery, wiring is a real strength for us. As Brice mentioned, in DRAM, we gained 10 points of overall DRAM share over the last 10 years. And if I look forward at the architecture inflections in DRAM, we're even better positioned. Those will be much more materials-intensive, materials engineering-enabled, and that's going to be a really good position for us. We also talked about packaging. We've increased our view of packaging in '24 to $1.7 billion. But as I mentioned and Brice reiterated, we have an opportunity to double advanced packaging business. In HBM, that's -- we've increased that growth from 4x to 6x this year. And the last one is our services business, 19th consecutive quarters year-over-year, where we've seen growth. And with these highly complex architecture inflections, it gives us a really great opportunity to add more value with our services business. Also as people are moving into new locations where they don't have an experienced workforce, we've talked about double-digit growth in services right now. That's a $6 billion run rate, but that's adding significant growth as we go forward. So, there's just a few other thoughts.
Stacy Rasgon: But you said $2.5 billion this year from gate-all-around and more than double that in -- did I hear that wrong? Does that suggest $5 billion in gate-all-around in 2025?
Brice Hill: Yeah, that's what...
Stacy Rasgon: Or did I misunderstand what you said?
Gary Dickerson: No, I think that math is correct.
Brice Hill: Yeah, that's right, Stacy. So, that's not just the increment. That's the entire equipment sales that we'll have for that technology. So, $2.5 billion for this year and opportunity to double that next year.
Stacy Rasgon: Got it. Thank you, guys.
Operator: Thank you. One moment for our next question. And our next question comes from the line of Mark Lipacis from Evercore ISI. Your question, please?
Mark Lipacis: Hi. Thanks for taking my question. Maybe a question for Gary. Gary, when you talk about like investing more in materials engineering, it seems like you're kind of climbing up the value chain to the place where your -- it used to be your customers' domain. And a lot of times when you see companies moving up the value chain and adding more value, ultimately, you see that reflected in improving margins. So, appreciate that you engage in partnerships and that's the spirit. But like if you're adding more value, it seems like that ultimately, at the end of the day, should come back to you in the higher profitability. And I'm wondering if you could just talk philosophically about that. Like how -- is that something you would expect to see happen, or does that manifest in other ways? Thank you.
Gary Dickerson: Yeah. Thanks for the question, Mark. So, if you look at the industry overall, all of our customers are racing to be first to market to deliver those major device architecture inflections that determine their competitive position. So, gate-all-around, backside power, those new DRAM architectures and packaging is becoming more and more important to power performance and costs. So that is really what shapes the competitive landscape in the industry. And it's very, very clear, we're working with our customers for technology generations out into the future. So, we have very high visibility in -- this broad and connected portfolio that we have gives us an opportunity to engage with customers in those early and very deep relationships on those architecture inflections. And as we look forward, we do see materials engineering as a percentage of spend and the relative contribution increasing. And Applied has clear leadership, especially with this broad, connected portfolio. We built integration capability inside Applied that is really tremendous and really co-innovating with our customers as they're driving those architecture inflections. So, I do believe, for sure, that we will be creating more value in those relationships with our customers, and that certainly is valuable for them. And our focus is to capture more value as we're delivering more value with them. So, your basic question, I agree with your thoughts.
Mark Lipacis: Thanks. Very helpful.
Operator: Thank you. One moment for our next question. And our next question comes from the line of Vivek Arya from Bank of America (NYSE:BAC) Securities. Your question, please?
Vivek Arya: Thanks for taking my question. Gary, maybe back to the gate-all-around. So, you're raising the forecast there by $1 billion. I think on, I think, HBM, you're raising it by another $100 million or so. Is that all going to show up in July and October? So, does it mean that conceptually, the second half of the year is over $1 billion higher than what you thought before? And then, on gate-all-around, what is driving such a significant growth versus what you thought before? $1 billion increase over $1.5 billion base is a very strong number. So, I'm just curious, what are the kind of the qualitative factors? And then just also quantitatively, does it mean that second half is $1 billion higher -- $1.1 billion higher than what you thought before?
Brice Hill: Hi, Vivek, it's Brice. I'll just do a clarification here. This quarter -- we decided last quarter when we talked about the incremental revenue for gate-all-around that it was a little bit confusing. So, we changed. And this quarter, we're talking about all of our revenue that's associated with the gate-all-around transistor and wiring. And so, that's not just the increment. So, the $2.5 billion that we're talking about this quarter is not supposed to be interpreted as an increase relative to the $1 billion we talked about last quarter. We're just changing the basis. Now, we're just quoting all of the business that's associated with the gate-all-around product. So, hopefully, that helps. So, as far as answering the question about what's driving the increase, I don't think our perspective has changed very much. It's $2.5 billion for this year. It can grow significantly next year as the technology ramps. And then, what I would say is you do see some of that in our Q3 guide. So, as you know, we took down -- or we're dropping off the incremental China DRAM shipments that we had. And in the second half, we're filling that in with ICAPS strength and growing leading-logic shipments that are driven by gate-all-around.
Vivek Arya: Brice, just a clarification...
Gary Dickerson: Vivek, I'd add, relative to kind of what drives the incremental spending, these technologies where you're improving device performance, the drive current, leakage, power consumption, all of those things, are incredibly difficult. And so, the customers -- and it's really all about this materials magic that we're able to provide with that broad portfolio of different types of technologies. So, step counts are increasing at every one of those different technology nodes as they are driving those roadmaps for performance, power to meet the -- especially for high-performance computing, AI computing demand type of applications. So again, those are very, very, very difficult technologies. Whether it's 100 billion transistors in a GPU or 100 kilometers of wiring in an applications processor, those are really amazing, amazing technology accomplishments with materials. That's what drives that incremental spending.
Vivek Arya: Thank you.
Operator: Thank you. One moment for our next question. And our next question comes from the line of Chris Caso from Wolfe Research. Your question, please?
Chris Caso: Yes, thank you. Good evening. The question is on advanced packaging, and you were pretty specific with what you're expecting this year. You spoke about the opportunity to double that again. You didn't provide a timeframe on that. So, if you could help us with some of the timeframe on when you expect to double that? And just in terms of what's driving that -- we know there's advanced packaging in logic and HBM, what's the mix of that in terms of what's driving the expectations higher?
Gary Dickerson: Hi, Chris. This is Gary. So, this whole focus around advanced packaging, heterogeneous integration is really a major drive across the entire industry. When you look at AI servers or any of these different kinds of applications, you see tremendous innovation in the high-bandwidth memory. You see tremendous innovation in how you're connecting together all of those high-performance logic chips and memory chips. And we really see the growth there being very, very significant, because it's so important to the industry's roadmap as kind of classic Moore's Law has slowed down significantly. This is another major driver of how the industry will innovate going forward. And with Applied, we have the broadest portfolio of technologies, PVD, CVD, CMP, plating, etch, we've added hybrid bonding, digital lithography, eBeam test. We have a very broad portfolio. And as we see those roadmaps -- and this is why I come back to architecture inflections are really what drives your incremental business going forward. So, we can see the roadmaps for our foundry-logic customers, for memory customers, all of them are investing very heavily in these types of technologies. And some of these areas also that are new innovations from Applied will help us drive that business 2 times higher, and I think that the compound annual growth rate keeps going up from there. The other advantage that we have besides this broad portfolio in the deep, multi-generation connection that we have with all of our customers is our full-flow packaging lab in Singapore. We're working with leading customers on those next-generation innovations, Chris. So, we have pretty good line of sight to what those inflections look like, the architecture inflections will look like in a very strong position to grow our share as those inflections come to market. We're not giving a specific timeframe on the doubling. It will happen over a number of years, but very, very optimistic about our opportunities in packaging.
Chris Caso: Thanks.
Operator: Thank you. One moment for our next question. And our next question comes from the line of Srini Pajjuri from Raymond James. Your question, please?
Srini Pajjuri: Thank you. Brice, I have a question on China. I think last quarter, you said you expect China to normalize to about 30% or so by the end of this year. So, my question is, is that still the expectation? And then, it looks like ICAPS is still holding up pretty well. So, is the decline primarily DRAM going forward? And I'm just curious as to given what we are hearing about what we're seeing in the end markets of ICAPS, I mean it looks like the broader analog is still relatively weak and auto is kind of mixed. I'm just curious as to what's driving the strength in ICAPS. Thank you.
Brice Hill: Okay. Thanks, Srini. Yes, first of all, our mix, as we move to the second half of the year, will normalize with respect to China as a percent of our total revenue. So, it will be closer to 30% as expected. And it's the dynamic that you highlighted. We had some catch-up DRAM shipments to particular customers in China for the last three quarters. Those will fall off as we go through Q3 and Q4, and that really will bring our percentage of China revenue back down to -- closer to what's average over the last few years, which we'll call about 30%. And then, with respect to the mix of business, so as that DRAM business falls off, our ICAPS business and our leading-edge logic business does increase to fill that in. And so that's consistent with continued strength in ICAPS, which the rest of the market for us in China would be ICAPS-related. And I think you described it well. The end markets are mixed. So, industrial and auto have been weaker. Smartphone, PC-related products have been slow, but gaining some strength recently. And then, as we've talked about image sensors, power chips, microcontrollers, a lot of those markets have been stronger. So, it's been mixed end markets, but the customers are investing for forward-looking demand and to get capacity in place for forward-looking demand. And when we see utilization in those markets, we've seen it improve. So, I think when people ask us for guidance, hopefully, the best thing we can tell you is Q1 and Q2 were very strong in ICAPS and Q3 will be another strong quarter in the ICAPS market. Thanks for the question.
Srini Pajjuri: Thanks, Brice.
Operator: Thank you. One moment for our next question. And our next question comes from the line of Atif Malik from Citi. Your question, please?
Atif Malik: Thank you for taking my question. I have a question on gate-all-around as well. Very strong outlook, $2.5 billion, doubling to next year. Is the customer funnel for this demand pretty broad across the four foundries? And also, if you can rank order for us in the $2.5 billion, FPE, ALD patterning, like what's driving the most demand? Thank you.
Brice Hill: I think, I'll take the first part. I think that demand is across our customer base. So, it's not one single customer, but we won't share any details about the relative balance between customers. And then, from a device mix perspective, Gary -- or I'm sorry, equipment mix, I don't know if there's anything you would highlight there.
Gary Dickerson: Yeah. I think again, one of the advantages that we have is this broad portfolio of technologies along with integrated tools and also our integration engineering where we're working with customers who are really co-innovating on these different technology inflections. So, if you look at gate-all-around, we have Epi, PVD, ALD, selective removal, etch, thermal processing, implant, CMP and eBeam. So, it's a very broad portfolio. And I'm not going to break out all of those different pieces. But what I would say is our ability to connect that portfolio together is really a tremendous strength in our ability to co-optimize as you're thinking about -- and we've done this back in FinFET also, where we were able to co-optimize and innovate in how you're building those structures so that you can improve power and performance. And we're doing the same thing with gate-all-around.
Operator: Does that answer your question?
Atif Malik: Yes. Thank you.
Operator: Thank you. One moment for our next question. And our next question comes from the line of Toshiya Hari from Goldman Sachs (NYSE:GS). Your question, please?
Toshiya Hari: Hi. Good afternoon. Thank you so much for taking the question. I had two quick ones, one on HBM and the other one on NAND. So, in HBM, your customers would tell us that they're sold out, certainly for '24. For the most part, they're sold out for '25 as well. So, my guess is you've got pretty good visibility into next year. Gary, you talked about overall advanced packaging doubling over the medium to long term. But when you zoom into HBM, could that business for you multiply again in '25 on a year-over-year basis? And then, on the NAND side, the business continues to be pretty depressed. Your customers, their profitability is improving, cash flow is improving or becoming less bad. Are you starting to see purchase orders from your customers come back? Or what do they need to see for them to spend on WFE again? Thank you.
Brice Hill: Okay. Toshiya, it's Brice. I'll start, and then Gary may add something on the HBM. So, on the sold out comment, what we do -- we have seen utilizations improve across the DRAM wafer starts. We've seen the allocation to HBM from a wafer start perspective increase from 5% to probably something closer to 20%. That said, it's not 100% utilized. So, you could speculate what the -- if there's some restraints, it could be in the packaging side, and we have seen orders for HBM going up. So, we'll have to let you think about that and talk to those vendors from that perspective. On the NAND side, our perspective on NAND is that Moore's Law is still very much alive in NAND. The bit density is increasing with each generation of NAND fairly aggressively. And it's meeting the demand function for increased bits. And what that really means is that the business we see in NAND is for technology upgrades, more technology upgrades not really new wafer starts. So, that's what we expect to see as we move forward. And overall, we expect NAND to grow at the speed of semiconductors. It's -- obviously, storage has a very important part, and several of the vendors called out how important storage is even for AI and that it will grow. So, I think for us, it's been slow, but we expect it to grow over time and memory in total to be about a third of our sales for WFE. And then, Gary, back to you whether anything specific on HBM...
Gary Dickerson: Yeah. Really -- hi, Toshiya. Nothing really too much more beyond what Brice was talking about. And we have seen demand for HBM strengthening. We went from about 4x increase to 6x increase from the last time that we talked to you guys. And I would say that we still are seeing incremental demand going forward. So that pull is still there from customers. We're not giving any point estimate for next year, but we do continue to see stronger demand in that segment.
Toshiya Hari: Thank you.
Operator: Thank you. One moment for our next question. And our next question comes from the line of Krish Sankar from TD (TSX:TD) Cowen. Your question, please?
Krish Sankar: Yeah. Hi, thanks for taking my question. Gary, I had a question on backside power delivery. It seems that the industry has two approaches to it. One is the backside wiring with direct contact with the transistors, and another one is the [nano-TFE] (ph) approach. I'm kind of curious, you've spoken about the 100 -- incremental $1 billion SAM for 100,000 wafer starts per month. How does it split between those two approaches? And also, can you quantify what kind of revenues you expect this year and next year for Applied in backside power delivery? Thank you.
Gary Dickerson: Hi. Krish. Yeah, I don't want to talk too much about the specific architectures that customers are using. That's confidential for all of those different customers. I would say that going forward, that direct connect to the backside is the path that everybody is focused on. So, I think over time, that will grow a fairly significant amount -- well, both of those approaches will grow a fairly significant amount. And we're deeply engaged with customers on that inflection. We're leading in wiring overall. We have a very, very high share of wiring. And so, wiring going to the backside, we've said that, that gives us an opportunity of 50% of that spend when that inflection happens. So, we're supporting both of those different types of approaches for the backside, but I don't want to get too specific in terms of which one do we see bigger. Over time, I think that it could move to the direct connect. But that timing, I don't want to give specifically because that's going to be each one of different customers' roadmaps. Relative to timing for revenue, it's pretty small for us right now in 2024. It will grow in '25, but the ramp -- significant ramp for backside power is still out beyond '25 in revenue.
Krish Sankar: Thanks, Gary. Thank you.
Operator: Thank you. One moment for our next question. And our next question comes from the line of Timothy Arcuri from UBS Securities. Your question, please?
Timothy Arcuri: Thanks a lot. Brice, I have two-part question on China DRAM. And the first part is, you talked about it coming down [$500 million] (ph). Is that stepping all the way down in fiscal Q3? So, what's the assumed step-down in China DRAM for fiscal Q3? And then, more broadly, of the $1.6 billion worth of DRAM business, I'm wondering if you can kind of help us figure out how much of that is China. If I look at Korea and I look at how much that is, it looks like about $1 billion of the $1.6 billion DRAM revenue is China. Can you confirm whether that's in the right ballpark? Thanks.
Brice Hill: Hi, Tim, thanks for the question. The only quantification that I gave in prior quarters was that our DRAM as a whole was up more than $500 million in the quarters where we had that incremental. So, I think I'll just leave it at that and say it's more than $500 million in each of the last three quarters. And as we look into the second half, it doesn't drop completely to zero in Q3, but it drops significantly and then it's pretty close to zero in Q4. And our mix to China revenue for the company, as I highlighted to an earlier question, will be about -- in the range of 30%, which is normal for us. So, I think that's as close as I can get on that. Thanks for the question.
Timothy Arcuri: Sure, Brice. Thank you.
Operator: Thank you. One moment for our next question. And our next question comes from the line of Joe Quatrochi from Wells Fargo (NYSE:WFC). Your question, please?
Joe Quatrochi: Yes, thanks for taking the question. I wanted to kind of try to understand just the trends that you're seeing in ICAPS. Can you help us just understand the difference in the growth that you're seeing from China versus non-China? Because it sounds like as we look at China revenue normalizing, the DRAM falling off, obviously, the rest of that is mostly just ICAPS. So, can you help us just kind of understand the trends between China and non-China?
Brice Hill: Hi, Joe, thanks for the question. Yeah, for China, what I would say is the last three quarters have been very strong. So, if we're speculating about a slowdown or a digestion period, one of the reasons I didn't reemphasize that is we're kind of going by what we're seeing. So, we had two strong quarters, Q1, Q2. Our Q3 guide again has strength in ICAPS and a strong fourth quarter for China. When we think about the world right now, I think we have three regions growing and the rest of the regions not growing. So that corresponds with the end markets sort of being mixed at this point. Our view of China overall, the team showed a pie chart of the different device elements of WFE last year. ICAPS was about 40% of WFE by that pie chart on May 2 that was put out. China is our largest market in ICAPS, and we monitor that carefully. We've got about -- we've got a large number of customers. We're tracking about 30 different -- more than 30 factory projects that are in ramp process. In other words, they have capacity, they're adding capacity, they're ramping. We're tracking utilizations. Utilizations are improving. We understand yields are improving. So, we think that the China market will be very large and important market for us going forward. We said we don't see a cliff for that market, and I think we'd stick by all those remarks at this point.
Joe Quatrochi: Thank you.
Operator: Thank you. One moment for our next question. And our next question comes from the line of Harlan Sur from JPMorgan (NYSE:JPM). Your question, please?
Harlan Sur: Good afternoon. Thanks for taking my question. As we transition from a more mature specialty ICAPS-driven growth profile to a leading edge, sort of advanced foundry-logic memory spending profile this year and going forward, this typically tends to be a strong tailwind for your process control and diagnostics portfolio, which leans very heavily on your most advanced tools and solutions, right? Because [picture] (ph) sizes get smaller, so better resolution required, but also new and more [defecting yield] (ph) challenges, right? So, it's probably a driver of your leading-edge CFE-driven eBeam portfolio this year. Are you guys still seeing that portfolio grow like 4x this year? And how does the pipeline look for next year? And maybe mid to longer term, like given the significant manufacturability challenges, does the Applied team see process control and diagnostics intensity rising faster than overall WFE intensity over the next few years?
Gary Dickerson: Thanks, Harlan. This is Gary. So, I would say that for sure, the connection that we have with our eBeam technology and these major architecture inflections is a real advantage for us, because, again, it's a race on who gets there first relative to those major architecture inflections and learning rate, how fast you learn is one of the determining factors. So, having this unique capability is a real advantage for Applied. I mean, obviously, it's a good growth driver for us from a revenue perspective, but that synergy with the rest of our broad portfolio, our connected portfolio, is a real advantage. On coalfield emission, which is really one of the key technologies in the electron optics, it gives us the highest resolution at up to 10 times higher imaging speeds. So, it really is highly differentiated. And we are still on track this year to grow our CFE systems revenue around 4x in '24, and that would represent about 50% of our total eBeam system sales. And then, when I look forward, again, I see PDC as a really great growth driver for Applied. We've had the strongest pipeline of new products than we've ever had. And the synergy with the rest of our process equipment business, all of that materials magic, materials innovation is increasing. So again, very, very optimistic about the shape of that business.
Harlan Sur: Thank you, Gary.
Michael Sullivan: Yeah, thanks, Harlan. And operator, we have time for just one more quick question please.
Operator: Certainly. One moment for our final question. And our final question for today comes from the line of Mehdi Hosseini from Susquehanna. Your question, please?
Mehdi Hosseini: Yes, thanks for letting me ask the question. Gary, you were talking about this inflection point technology leading-edge logic, HBM, DRAM and advanced packaging, but would it be fair to say that what is not in your backlog is the additional wafer capacity, especially for gate-all-around and memory, and that would be something that would be coming in, the [POS] (ph) be placed later this year for shipment in 2025?
Brice Hill: Yeah. Hi, Mehdi, it's Brice. I guess I'll take that one. We do expect -- I can't tell if it's a greenfield question or not, but we do expect increased wafer starts across definitely ICAPS, definitely leading logic, a smaller amount in DRAM. And probably the place where we don't really expect increased wafer starts is in NAND, but that will still be upgrades. So, most of the memory technologies are upgrades. But it will be a combination of new technologies and new plant and equipment across the board.
Mehdi Hosseini: Thank you.
Michael Sullivan: Okay. Thanks, Mehdi, for your question. And now, Brice, would you like to give us your closing thoughts?
Brice Hill: Thanks, Mike. I think we've done a good job anticipating the roadmap inflections in datacenter AI. We can see the pull for our solutions in gate-all-around chips, from transistors to frontside wiring and backside wiring and in advanced packaging. Same goes for DRAM, where we're number one in materials engineering and especially strong in HBM stacking. In future calls, we'll have a lot more to say about our positions in edge, AI and IoT plus automotive and clean energy, which are very big and long-term drivers of our ICAPS business. The momentum in our systems business fuels our service business, which is driving very stable subscription-like growth and helping us increase the dividend at an accelerated rate. Gary will be at the Bernstein Conference in New York on May 30, and I hope to see many of you at the BofA conference in San Francisco on June 6. Thank you, Mike. Let's close the call.
Michael Sullivan: Okay. Thanks, Brice. And we'd like to thank everybody for joining us today. A replay of today's call is going to be available on the IR page of our website by 5 p.m. Pacific Time today. And we'd like to thank you for your continued interest in Applied Materials.
Operator: Thank you, ladies and gentlemen, for your participation in today's conference. This does conclude the program. You may now disconnect. Good day.
This article was generated with the support of AI and reviewed by an editor. For more information see our T&C.